复合塑料袋制版需要几支版怎么看

来源：http://www.scuhtg.com/ 日期：2024-12-14

　　复合塑料袋制版需要根据袋子的颜色和尺寸来决定制版数量。以下是制版的基本规则：

　　The number of plate making for composite plastic bags needs to be determined based on the color and size of the bags. The following are the basic rules for plate making:

　　制版数量 ：

　　Number of plate making:

　　一个颜色通常需要一个版。

　　A color usually requires one version.

　　如果袋子有五种颜色，则需要五支版。

　　If the bag has five colors, then five versions are required.

　　版费计算 ：

　　Version fee calculation:

　　版费通常是根据制版数量来收取的。

　　The plate fee is usually charged based on the number of plates made.

　　颜色越多，版费越高。

　　The more colors there are, the higher the plate fee.

　　尺寸考虑 ：

　　Size considerations:

　　对于OPP胶袋，制版时考虑的是袋子的周长和长度。

　　For OPP plastic bags, the circumference and length of the bag are considered during plate making.

　　周长计算公式为：周长 = 2 × （长度 + 宽度）。

　　The formula for calculating circumference is: circumference=2 × (length+width).

　　对于宽度为48cm的袋子，制版时宽度需要考虑为48cm，长度为袋子实际长度，但小周长限度为36cm。

　　For a bag with a width of 48cm, the width needs to be considered as 48cm during plate making, and the length should be the actual length of the bag, but the minimum circumference limit is 36cm.

　　特殊情况 ：

　　exceptional case:

　　如果袋子两面都有印刷，版费计算需要考虑袋子的宽度乘以2。

　　If both sides of the bag have printing, the plate fee calculation needs to consider multiplying the width of the bag by 2.

　　对于复杂图案，如人像，可能只需要4个CMYK印刷版，但大色块可能还需要使用专色版。

　　For complex patterns such as portraits, only 4 CMYK printing plates may be required, but for large color blocks, spot color plates may also be needed.

　　错误制版 ：

　　Incorrect plate making:

　　如果制版后发现图案或文字有错误，需要重新制版。

　　If errors are found in the pattern or text after plate making, a new plate needs to be made.

　　每换一个版就要收取一支版的费用。

　　A fee will be charged for each version change.

　　制版费用和数量会根据具体情况有所不同，建议在印刷前仔细确定好图案和文字，以避免制版错误带来的额外成本。

　　The cost and quantity of plate making may vary depending on the specific situation. It is recommended to carefully determine the pattern and text before printing to avoid additional costs caused by plate making errors.

　　本文由 济南复合塑料袋  友情奉献.更多有关的知识请点击  http://www.scuhtg.com   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Composite Plastic Bag For more related knowledge, please click http://www.scuhtg.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.